On the bar graph, the WHITE is the total harvest when the controller is in BULK; Grey is harvest while the Controller is in ABSORPTION; and the Blueish bar is harvest when the Controller is in FLOAT.Here’s a screengrab of one of my Victron graphs. I don’t have a problem to sort out, but I’d like some detail of what is actually being shown
View attachment 129367
The "Consump." is the consumption of the LOAD output I think. If you have a Victron MPPT 75/10, 75/15 or 100/20, it will have a LOAD circuit and if you are not using that you can turn it off and save that residual 10Wh/Day (0.7Ah/Day).Here’s a screengrab of one of my Victron graphs. I don’t have a problem to sort out, but I’d like some detail of what is actually being shown
View attachment 129366
If charging Lead, then near 15V could be just ok if say the charger is set to 14.7V (a common default and charge requirement for some batteries) given the cold temperatures currently. if the Temperature was 10C, then the charge voltage set would actually run 0.16V higher - so 14.86V instead of 14.7VYour 12v battery's are full and voltage looks high at 15 volts. If wet still overcharged. If lipo 14.2 volts. = max