LPG valve cover replacement

[sludgesurfer]

I have an underslung LPG tank. Its a GasIt installation. I've lost the black plastic cover for the valve/pressure gauge assembly which clips to the side of the tank.
Any ideas where I might find a replacement? The GasIt website is down (for me at least). I've mailed their sales e-mail and I'm awaiting a response. I've found what looks like one on ebay but but I'm not absolutely sure it's correct plus it's £37 delivered.

GAS IT underslung tank valve protection lid - fitted to AutoSleepers, Elddis etc | eBay

New GENUINE Lid for GAS IT underslung tanks.

www.ebay.co.uk

Here's a photo showing the missing cover.

 

[DTF]

Sadly Gasit has gone. Dragon Products has taken over selling their products. They are not selling tanks anymore but are selling fittings: https://www.dragonproducts.co.uk/protective-airbox-lidfor-gas-it-generation-2-gas-tank-s.html.

Slightly off topic but I would be concerned about the rust that seems to be around that strap!

 

[Nabsim]

Sadly Gasit has gone. Dragon Products has taken over selling their products. They are not selling tanks anymore but are selling fittings: https://www.dragonproducts.co.uk/protective-airbox-lidfor-gas-it-generation-2-gas-tank-s.html.

Slightly off topic but I would be concerned about the rust that seems to be around that strap!

Indeed, and the rust on the tank itself

 

[Tezza33]

Slightly off topic but I would be concerned about the rust that seems to be around that strap!

My van failed the MOT because the straps were too corroded, when I removed them it was only the plastic coating that was holding one side on
Luckily I had left the ratchet straps that I used to position the tank in place, I cleaned the tank and repainted it at the same time as fitting heavier duty straps

 

[sludgesurfer]

Thanks. Ive ordered a cover. Having had a good dig round, whilst the tank definitely needs a brush up and paint, the photo paints a bad picture. The coating is coming away and it's just surface rust on the tank itself.

Planning to get under once the weather improves.

 

[Glandwr]

I gave up on my dual under slungs when my MH guy said that he wouldn't check it cos it was over 10yrs old and i hadn't been recertifed. Apparently there's only one place now that will certify them and they charge slightly less than a new install would cost.