daveg
Guest
2007 T674GT. I've only ever seen one other one and that was a British registered one spotted in France.
Based in Berkshire.
Based in Berkshire.
The fridge does seem to be the perennial problem with older vans if you look at the posts on here and other forums.I have had a new burner and igniter box on mine.Fortunately they can be repaired quite easily which is good because the price of a new one is pretty steep.
It depends on the installation, mine has to be taken out to be serviced because the bottom vent is underneath not on the back panel, a lot of Hymers are like that because of the fridge position at the back, because of the rear bumper they don't have a normal lower vent which can be taken off to service the fridgeI don't think it has to be taken out to be serviced
It depends on the installation, mine has to be taken out to be serviced because the bottom vent is underneath not on the back panel, a lot of Hymers are like that because of the fridge position at the back, because of the rear bumper they don't have a normal lower vent which can be taken off to service the fridge
When I remove my fridge I can see a cutout where the vent would be but it hasn't been cut out of the external panel just the woodwork inside, it wouldn't take much work to cut it out just the aluminium skin and I have considered it but maybe next yearMine too. You can get to the lower vent with the rear bumper removed though that's not a 5 min job and access is still restricted. First time the fridge failed I wanted to check properly so I took it out to run it on the bench. Second time I cleaned the jet with bumper removed.
Keith
Mine is covered by the bumper but you can see the cut out from the inside when the fridge is removed, probably easier toremove the bumper than the fridge so it is on the cards for the hole to be cut and a plate made to cover itI've got an oblong panel to the o s r above the bumper,when ar the st,Andrews meet my fridge was tricky to start/run on gas,came home unscrewed the panel and removed the jet/ ignighter etc.cleaned and blew out reassembled and sealed and fitted the panel back on all in all saved a few hundred quid as I was getting quoted,also told it's a mare to do,done it in an hour,working abso brilliant now,
I do the same when I am in the car, they must think we are simpletonsView attachment 41159View attachment 41158View attachment 41157Drove up the A1 to Scotland and gave every mh I saw a friendly wave - not one of them waved back - was it because I was in a Hyundai? :lol-049::lol-049: