ProDave
Full Member
- Posts
- 349
- Likes
- 664
Our rear view camera is faulty, it appears to be an optical fault, more than half of the picture, a big "blob" at the bottom is out of focus. I suspect water ingress to the camera.
It's on the rear of our Tischer demountable camper. Here is what I know so far, but manufacturers and part numbers are very scarce.
The camera is attached to the high level brake light. I removed the brake light and camera as one, then dismantled the brake light unit to detach the camera. The brake light is partly faulty, 4 out of the 10 LED's are dead, I am going to try and repair that.
The camera has a very tiny red 6 pin plug to allow the cable to pass through a very small hole. Inside the 'van there is this cable assembly
That seems to take it from the 6 pin plug on the camera to a similar sized black 4 pin male plug that disappears into the wiring of the camper.
In the cab (at least one more larger connector to allow the camper to demount) is a REVCAM UK model No MON2930G V1 monitor that clips to the rear view mirror. That has a similar style but slightly larger 8 pin plug. I have the user manual for the display unit.
The interconnecting cable assembly has a tag with RVCAM-001 on it. Googling that yields no results.
Likewise searching Revcam UK's site for MON2390G reveals nothing.
All I have found so far i there are a plethora of different connectors used and no particular standards.
Anyone solved this conundrum?
I will attempt to contact the manufacturer of the camper to see what they say, but the most disappointing thing is lack of any details on most of the kit, It is only 3 years old.
It's on the rear of our Tischer demountable camper. Here is what I know so far, but manufacturers and part numbers are very scarce.
The camera is attached to the high level brake light. I removed the brake light and camera as one, then dismantled the brake light unit to detach the camera. The brake light is partly faulty, 4 out of the 10 LED's are dead, I am going to try and repair that.
The camera has a very tiny red 6 pin plug to allow the cable to pass through a very small hole. Inside the 'van there is this cable assembly
That seems to take it from the 6 pin plug on the camera to a similar sized black 4 pin male plug that disappears into the wiring of the camper.
In the cab (at least one more larger connector to allow the camper to demount) is a REVCAM UK model No MON2930G V1 monitor that clips to the rear view mirror. That has a similar style but slightly larger 8 pin plug. I have the user manual for the display unit.
The interconnecting cable assembly has a tag with RVCAM-001 on it. Googling that yields no results.
Likewise searching Revcam UK's site for MON2390G reveals nothing.
All I have found so far i there are a plethora of different connectors used and no particular standards.
Anyone solved this conundrum?
I will attempt to contact the manufacturer of the camper to see what they say, but the most disappointing thing is lack of any details on most of the kit, It is only 3 years old.
