winks
Full Member
- Posts
- 2,415
- Likes
- 4,387
Got a leak from around the plughole in the shower tray and a gentle poke at the metal insert just pushed through.
The van is an eighteen year old Hymer and I don't want to go to the expense / hassle of replacing the complete tray, which is in otherwise good condition. So what I've come up with is fabricating what is basically a big washer 75mm diameter with a 35mm hole for the plughole out of 2mm Ali sheet and fixing this over the existing, now oversize hole. The surfaces will be cleaned up with isopropyl alcohol and I intend using white Evostik 'Sticks Like Sh*t' to bond the repair to the tray. After fitting I will give it a couple of coats of white Hammerite just to deter the Ali from oxidising too rapidly, although the shower isn't greatly used.
I've never used Sticks Like Sh*t and would appreciate any advice from those of you who have, or any alternatives that you have used successfully in a similar situation.
Cheers
H
The van is an eighteen year old Hymer and I don't want to go to the expense / hassle of replacing the complete tray, which is in otherwise good condition. So what I've come up with is fabricating what is basically a big washer 75mm diameter with a 35mm hole for the plughole out of 2mm Ali sheet and fixing this over the existing, now oversize hole. The surfaces will be cleaned up with isopropyl alcohol and I intend using white Evostik 'Sticks Like Sh*t' to bond the repair to the tray. After fitting I will give it a couple of coats of white Hammerite just to deter the Ali from oxidising too rapidly, although the shower isn't greatly used.
I've never used Sticks Like Sh*t and would appreciate any advice from those of you who have, or any alternatives that you have used successfully in a similar situation.
Cheers
H