Wax oil treatment

How do you get that inside sills and doors etc, vans/cars rust from within and not the underside of the floor.
Drill small hole in top of sill then plug afterwards....
Same as Ziebart used to do.

IMG_1926.jpg


20190826_145039-1512x2016.jpg
 
Drill small hole in top of sill then plug afterwards....
Same as Ziebart used to do.

View attachment 96269

View attachment 96270
I was referring to the tiny gun parafin guns have very long necks to get well in and can be extended with a bit of hose, most cars/vans have big holes inside under the carpet at sills, getting door trim of these days can be troublesome, some removal spoon tools on ebay for this task.
 
I was referring to the tiny gun parafin guns have very long necks to get well in and can be extended with a bit of hose, most cars/vans have big holes inside under the carpet at sills, getting door trim of these days can be troublesome, some removal spoon tools on ebay for this task.
IF you buy a proper applicator they come with a thin flexible hose that has right angled orifices that fits on the end of the rigid wand...

Most modern vehicles have plenty of holes in most of the box sections anyway to allow the penetratation of the phosphate dip most body shells go through as part of the paint process...
 
40 odd years ago Ziebart was a popular add on to the new cars we sold, it was a lovely smell, I often wonder if it did any good
 
40 odd years ago Ziebart was a popular add on to the new cars we sold, it was a lovely smell, I often wonder if it did any good
Certainly from the dealings I've had with old/classics in the past the ones with evidence of Ziebart treatments fared a lot better than none treated ones.
 

Users who viewed this discussion (Total:0)

Back
Top