Winger
Full Member
- Posts
- 74
- Likes
- 106
This would be close and it’s mounted on a track on the base, I can’t find a makers name tho. It’s fitted on a Pilotelooks like it could work so just went to measure.... No
Cupboard is VERY narrow. Measures 900 x 590 x 97 (mm). I think any supports would take up most of the space with a cupboard that narrow (and actually being able to reach in to make fittings secure would be pretty tricky as well)
Also just measured a tin of baked beans ... 75mm - so would only have room for a small amount as well anyway)
i reckon this would work if you could source one. No sign of a maker’s name. It’s fixed to the baseAh. I will do some measurements.
Obviously I keep the table in it at the moment but I only ever use the table outside, never inside, so repurpose could be good
Attachments
-
A9C5E73D-1246-4622-9FF9-D3F8E69C0688.jpeg377.6 KB · Views: 93
-
A312B2CF-ACDF-448B-BAE6-364E31AEC017.jpeg311.5 KB · Views: 91
-
4753DE16-DC2C-4D1B-9802-2DABD2F645E8.jpeg375.3 KB · Views: 102
-
2A8498E7-0996-4C7B-8F95-9994E131E968.jpeg397.5 KB · Views: 95
-
8B4547E8-1F7C-4CA9-A635-F4DF68E698C8.jpeg496.7 KB · Views: 95