Split screen on monitor for reversing camera

  • Thread starter Thread starter Deadsfo
  • Start date Start date
Deadsfo said:
Does that mean you will have one camera pointing somewhat downward to see in the immediate proximity of the rear of your van and another set up pointing outward along the road as pseudo rear view mirror,wont one mirror pointing backward do both or doesnt the angle scopethe camera covers give you a wide enough view
Click to expand...

I have finished the twin camera install now, I just need to put the vehicle on the road so I can set up the cameras so that one camera just catches the back of the vehicle for close reversing and the rear vision camera slightly overlaps the reversing one, which should mean I have the road covered from the back of my vehicle backwards to infinity (and beyond ;))
I set up the system so that it can be switched on without the ignition.. :ninja:.. I am able to choose which camera I want on, until I select reverse gear, at which point the reversing camera switches on and reverts back to the rear vision camera (or whatever I had selected before reversing), when I deselect reverse... was that understandable? :p

I have recently purchased another twin system to fit on another van, and noticed that you need to ensure that if you wish two rear 'mirror' (that is, as if you are looking into a cab mirror to reverse) views, it is vital that you check you are not buying a system that only allows one reversing picture and an input for a dvd.
 
You must log in or register to reply here.

Users who viewed this discussion (Total:0)

Back
Top