Teutone
Guest
some may recall that I had some trouble running the fridge on gas. All solved now and working well.
While I had everyting apart I thought this would be a good idea to fit a thermometer to see how cold the fridge is. Up to now I had used some wireless thermometer recommended from some members on this forum.
worked really good but I was fed up of the control unit flying through the van when I had forgotten to put it away before driving off.
Then I saw this little beauty on EBAY :rolleyes2:
A 3 in 1 thermometer, voltmeter and clock display! All for a Tenner.

decided to fit it to the plastic shroud of the fridge which I had taken off already to chase some other faults

peeled the Ci sticker off and found this :dance:

some masking tape to mark up the hole to cut

Man's best friend at work, the DREMEL!

first test fitting looking good

from the plastic leftover from the window I formed to blocks to mount the switch board. All fitted with Superglue

view from behind with everything fitted

test run showing temperature in my garage

I also fitted an ON/OFF switch. The display is quite bright and there is already enough light in the MH at night. The two little black dots are the mode and set button for the display

all fitted back in the MH showing temperatur

showing time (there is a little backup battery fitted in the clock to keep the time even with power disconnected)

showing voltage of Leisure battery

only thing which is probably not to everybody's taste is fitting the probe for the thermometer. I had to drill a hole through the roof of the fridge to get the cable with the probe inside the fride.

Now I am eager to go out for another trip and test it all! You can set the display to show each mode permanent or to scroll throught the three modes
While I had everyting apart I thought this would be a good idea to fit a thermometer to see how cold the fridge is. Up to now I had used some wireless thermometer recommended from some members on this forum.
worked really good but I was fed up of the control unit flying through the van when I had forgotten to put it away before driving off.
Then I saw this little beauty on EBAY :rolleyes2:
A 3 in 1 thermometer, voltmeter and clock display! All for a Tenner.

decided to fit it to the plastic shroud of the fridge which I had taken off already to chase some other faults

peeled the Ci sticker off and found this :dance:

some masking tape to mark up the hole to cut

Man's best friend at work, the DREMEL!

first test fitting looking good

from the plastic leftover from the window I formed to blocks to mount the switch board. All fitted with Superglue

view from behind with everything fitted

test run showing temperature in my garage

I also fitted an ON/OFF switch. The display is quite bright and there is already enough light in the MH at night. The two little black dots are the mode and set button for the display

all fitted back in the MH showing temperatur

showing time (there is a little backup battery fitted in the clock to keep the time even with power disconnected)

showing voltage of Leisure battery

only thing which is probably not to everybody's taste is fitting the probe for the thermometer. I had to drill a hole through the roof of the fridge to get the cable with the probe inside the fride.

Now I am eager to go out for another trip and test it all! You can set the display to show each mode permanent or to scroll throught the three modes