Looking good. I’m liking the new lockers.
Van,yes fun Steve, but a lorry? Different story Steve? LolI figured it was ling overdue to something about the dull finish on Larry....
View attachment 94765
Side is as was, back done. I'm using a 6inch mop machine and g3 cutting compound. Comes up quite nice, but it's hard work!
Get a bit van they said, it'll be fun they said....
My mop is a twin speed Trev, I have only started it on fast twice by accident and burnt the paint even with a wet mop, nicely taped up sinceUse a spray bottle with water to keep the mob and work wet or it will burn.
My mop is a twin speed Trev, I have only started it on fast twice by accident and burnt the paint even with a wet mop, nicely taped up since
Mine is an old Sealey Rob, fast speed was for sanding and slow speed for polishing, older version of thisWhich one have you got Terry?
I've been looking for one for Julie to clean the boat with.
Mine is an old Sealey Rob, fast speed was for sanding and slow speed for polishing, older version of this
Sealey ER1700P 240v Variable Speed Polisher Buffer Lightweight 180mm 1100w 5024209603713 | eBay
View attachment 94769
Mine is quite heavy but I bought it in the early 90's, you should be fair to Julie and buy her a lightweight one, also make sure her waders don't leak (much)
She might need one of these Rob just in case she goes below the waterline
View attachment 94770
Your call but it is cheaper than a new polisher
Slow speed and wet the job not the mop.My mop is a twin speed Trev, I have only started it on fast twice by accident and burnt the paint even with a wet mop, nicely taped up since
I knew how to do it Trev, that was the stupid part, just not thinkingSlow speed and wet the job not the mop.