Remove a Table

Toffeecat

Free Member
Posts
640
Likes
1,400
Hi all. We have a table in our Adria 590. Its a lovely bit of kit, rises up and down, forward and back, up and down and used as part of the bed. Thing is we never use the bed with the table we only use the electric drop down bed. Anyway we decided its a bit big for us, heavy we want to remove it for a different design. Has anyone removed this type of table? Theres a load of screws which seems to hold the table down to the floor but I just wondered if its as easy as removing the screws on the bottom. The table on this model is the same and about 2.30 in on the video.

 
We removed a similar table in our Frankia because it restricted relaxation in the lounge space. I then bought one of these Fiamma Tripod Stand and a light weight table top the same size as the one removed and a small circular one. So we can use the large one inside or outside for meals and the small round one inside or outside for drinks. When not in use their stowed away on the drop down bed and at night the small round one left up and the other put across the cab door entrance. The difference it make to the lounge space for relaxing and access is terrific.
 
Yes done this in an Adria coral same table I think when you have removed the screws it still takes some force to break the seal with the floor but is not glued or anything so brute force is required
 
We removed our large table in our EuraMobil for the same reason, to give us more lounge space.
I relocated our table onto our covered decking at the house and built some seating round it with physiotherapy plinth tops.
We now use a variety of the slot in type smaller tables in the van, depending on our need, depends on the size of he table. :)
 
Best is a removable small table which you can wall store when not in use,there is a wall mount beside seats & table has a fold down leg going into a floor clip
table toilet door.jpg
table seats.jpg
 

Users who viewed this discussion (Total:0)

Back
Top