PeteandJules
Full Member
- Posts
- 5
- Likes
- 6
The gas we are getting has been of a lesser quality and there is a residue of oil or waxes left in the product. Over a period of time these start to block the jet reducing the flow and efficacy of the burner. To clean out successfully use an electrical cleaner or WD40 and ensure that the cotton bud or whatever is clean when you have completed your job. This normally fixes the problem. Of course the jet has to be removed. DO NOT under any circumstances put something through the jet. This alters the gas air mixture and the unit will produce copious amount of deadly carbon monoxide.