Finally got around to removing the 3 way fridge today....

[trevskoda]

I made one from alloy and it bolts to the spare door swing holes on the top, easy peasy job.

 

[wildebus]

I made one from alloy and it bolts to the spare door swing holes on the top, easy peasy job.
View attachment 104989

That looks good and handier than the way I did mine. I think I might redo to your method.

 

[trevskoda]

That looks good and handier than the way I did mine. I think I might redo to your method.

Just cut the slot back at a slight angle for tightness, light press in on the door, and swing it away.

 

[wildebus]

Something that could be useful on that catch ... Have a second position so you can lock the door into place but slightly open to allow ventilation if switched off and need to drive the van.

 

[trevskoda]

Something that could be useful on that catch ... Have a second position so you can lock the door into place but slightly open to allow ventilation if switched off and need to drive the van.

A the catch would not be tight on the door seal it may not work, unless you used a sponge stuffed into the door gap leaving the rest free to breath, good idea wildbus, must look into that.