Thanks Tony, This was my intended way and will attempt the syphon method tomorrow but I think the tank will be too far from the filler cap and threading a tube may prove difficult
One of the cheap syphon pumps - vary in price from around a fiver upwards depending how sophisticated you want to go. Any decent motor factors has them.
Some filler tubes do have an antitheft device part way down but I've found if you can use say a 10mm tube it will get past it. Just keep turning and pushing (and maybe cut the end of the tube on a slant) and it will get down eventually.
Try putting some stiff wire down the tube. Let about an inch stick out of the end and give it a bit of a curve. Make sure the end is not sharp and try again.
When mine was drained last year they hammered a hole in the side of it underneath.:mad2: Just hopen they put it straight into there Beamer or similar car as it was near enough 100% rape seed oil.:lol-061::lol-061::lol-061:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.