http://www.caktanks.com/files/cak_catalogue_2011/2011 Electrical.pdf
Sorry folks
If you look in the above website you will the top box for Honda generator listed.
This...it's on page 90 of the link.
TOP ENERGY BUILT IN OPERATING LOCKER FOR HONDA EU10i & EU20i GENERATORS
• Secure storage
• No need to remove generator to operate
• Ultra quiet operation
• Ease of access
• 50% the cost of a built in generator & less than 50% of the weight also
• Easy for you to remove if it is needed away from the installation.
• Can be used for other storage when generator not on board.
• Unique patented design
Top Energy is designed exclusively for the reliable Honda EU10i & EU20i
generator range. Casing is produced from powder coated galvanized steel for good
corrosion resistance has openings located for cooling and access to controls for
operating the generator. The Top Energy casing bolts to the floor with anti vibration
mounting brackets (1), this can be mounted to the chassis with optional brackets
though. The casing interior is lined with noise absorbing foam to make these quiet
generators even quieter. The generator is located in a base tray that slides out on
ball bearing draw slides attached to this tray is the casing door. The casing door is
retained by two screw locks with removable key for security. The front of the casing
has a hinged multi adjustable mounting frame to attach the section of side skirt
cut out to fit the Top Energy.
The supplied rubber profile is bonded to the edge of this section of side skirt to give
a neat finish when the skirt door is closed. This is finished off by the installation of
two suitable locks (LDL1036) (An aluminium reinforcing profile to aid fitting the
locks can also be supplied if required) to secure this outer door making the
generator even more secure. The exhaust fumes are ducted away with the supplied
metal piping (2) further reducing noise while allowing the generator to be operated
while traveling. We recommend the addition of the Vent Wind Deflector (3)
produced in tough plastic it allows the airflow to draw through the casing allowing
the Top Energy generator to be operated while on the move.