REC
Full Member
- Posts
- 4,388
- Likes
- 10,116
Well, our water stopped coming out of the tap. Cold water only going to a submersible 12v Comet pump in container. I, stupidly, thought I would " have a go" ....The tap clicked when turned on but nothing happened so had already ordered a replacement pump as it would be sense to have a spare anyway. However, I decided to look at the microswitch and took the end off the tap exposing it. It all looked ok, made contact when turned on, but when I put the tap back together, I broke the switch 
( no longer clicks and when taken apart, the contact wire bit are gone!) so now that will definitely need replacing whereas it was probably only the pump before I "fiddled"! My question is, how do I identify the tap and get replacement or do I have replace the whole tap? It was converted by a company but not there now so can't go back to them. Any ideas from you clever people would be appreciated.
( no longer clicks and when taken apart, the contact wire bit are gone!) so now that will definitely need replacing whereas it was probably only the pump before I "fiddled"! My question is, how do I identify the tap and get replacement or do I have replace the whole tap? It was converted by a company but not there now so can't go back to them. Any ideas from you clever people would be appreciated.
