Sigma alarms

wusiwug

Guest
Hi all Great site .I'm a newbie looking for help, my Swift suntor is fitted with a Sigma AC111 alarm when I look the doors from inside I can't kill the movement sensors until the alarm goes off (waking everybody for miles around) The dealer who I bought it off has failed to get any operating instructions for the alarms .....the key fob has 2 buttons on it tried all combinations with no success......has anyone got one of these alarms that can tell me how it works so everyone around me can get some sleep..:eek:
 
Try This

I don't have the same a;arm as you, I have a Sigman M30 or something and only one buttton on the key fob:)

To disable the interior movement sensors on mine I have to turn ignition on then press the alarm set button on keyfob, open any door then close door and set alarm with keyfob.

I use this function a lot while leaving the dog in the van. Nearly always forget to unset alarm when opening door in the morning too:eek:

john
 
ref sigma

Hi wusiwug,
We have a sigma alarm system , And like JOGGUK have only 1 button to
opperate, have you got one button to lock and one to open ?
Also have you a red l.e.d. light on the dash somewhere ?.
If so switch on ignition press lock button turn off ignition take out key and press lock button again,
Hope this helps wendy & keith.:rolleyes:
 
Ref Sigma

Hi Wilthebeast
Thanks for your advise will try that .We do have a red LED on the dash also a key pad on the windscreen ! We have no problem when leaving the van its when we are inside and want to lock/ alarm at night after abourt 5 mins alarms go off !
Ray and Margaret
 
re sigma

Hi wusiwug,
Do you have central locking locking too ?,
As normally your 1st press on button would lock doors and set alarm but with ignition on and press button does not lock the doors but once you take out the key and press button again locks the doors and switches off the sensors inside the cab allowing movement inside your van,(just remember to press the remote again before you open any door when you get up or the alarm will go off).
ref the light on dash you should find that as above on the first press of remote with ignition on the light will stay on and when you take key out and press remote again the light will start to flash and lock the doors.
Ref your key pad on dash very complicated to explain as you have no instructions BUT to use the key pad you will need a 4 number code to access the main unit ( look in your paper work for a small silver lable with numbers on it)let us know how you get on .
wendy & keith :D
 
Sigma

Hi Wilthebeast
Thanks for all your help :)
Regarding the keypad I have written to the previous owner asking for the 4 diget code they were using !
Regards Ray
 
Hi, Ray and Margaret, I have a Sigma with a keypad, and to disarm the internal sensors you have to turn on the ignition...... press 2 on the keypad, then arm the alarm with the fob and turn off ignition. alarm should now be armed but omitting the internal sensors,,,...... BUT remember to disarm before opening a door or hatch, if alarmed.:eek:
 
Hi again,R&M.... Sorry I gave you false info:eek::eek::eek: The correct procedure is.... Turn on ignition and leave on then press 2 on keypad, then turn OFF ignition and arm.........:eek: that should sort it.
 
Sigma/Scorpion Alarms

Hi
I have finally got my sigma alarm keypad 4 diget number changed to one of my choice without having the existing number ....If anyone is having the same problem or any other problem with Sigma or Scorpion alarms I now no a man who can help ........Message me and I;ll put you in touch
Regards Ray
 
We have same system but its about 10 yr old and not working , so tomorrow we are having it redone updating the system.I think they are using the same wireing thats there but renewing the other parts..

Val
 
Sigma Alarms

I have a Sigma S30 alarm fitted in my Elddis m/h but have only 1 keyfob, have tried locally (Aberdeen) to source a 2nd keyfob to no avail, have also
tried to trace Sigma Alarms without success - does anyone know of a Sigma
dealer/installer in the North Scotland area, or the address / webb site of
Sigma alarms.
Cheers & Thanks Scotsbob
 
Hi Scotsbob Sigma alarms is now Scorpion alarms....If you ring Tony Hayes on01257 249928 he will tell you who the nearest dealer is .any problem if you pm me with whats exactly wrong I may be abe to help ........:confused::D:D
 
Hi Wusiwug, many thanks for the info re Sigma Alarms, don't have a problem with it, its that we have only 1 key fob, and I would a spare to fit to the spare ignition key just in case we 'mislay' the original. I will give Tony Hayes a phone.

Cheers, & A Merry Christmas & Happy touring.
 
Sigma Alarms

Hi Scots bob ........hope he can help
Happy Cristmas Ray& Margaret
 
Turning off

Hi anyone know how to reset or turn off my Sigma alarm,,, the dam thing keeps going off,,, i have unplugged the siren, but the lights still flash when it goes off,,,, cheers.
 
Sigma alarm

wusiwug said:
Hi
I have finally got my sigma alarm keypad 4 diget number changed to one of my choice without having the existing number ....If anyone is having the same problem or any other problem with Sigma or Scorpion alarms I now no a man who can help ........Message me and I;ll put you in touch
Regards Ray
Click to expand...

Please help - no instructions with my sigma alarm. Pleas email me - barry.youlditch@btinternet.com with how to use the keypad Cheers
 
problem

Hi i have the code,, but i don`t know how to use it,, i have 2 button key fob, with central locking,, cheers.
 
elguopo said:
Hi i have the code,, but i don`t know how to use it,, i have 2 button key fob, with central locking,, cheers.
Click to expand...

What is the current engine battery voltage as the Back-Up part of the siren may have activated as it thinks the engine battery has been disconnected.

Rgs

Nick
 
sigma

Thanks Nick,, ill look into that one might get an Optimiser fitted so the battery dosn`t get discharged,,
 
You must log in or register to reply here.

Users who viewed this discussion (Total:0)

Back
Top