thicknes of cupboard panels

[oldish hippy]

go to bq what thickness panel will i need need to make on large panel well large in case of my camper is probally small in most but want it to double up as table top with camera tripod {well carry tripod any way for bins }table leg =more weight so remove panel as it to hide porta loo and stop it wandering around fix with four small bolts into existing panels hopefull they can cut the other panels i need from one sheet or get two small one and get all the cut from them

 

[steco1958]

Oldish Hippy, I would love to answer you, unfortunately, I am unable to ascertain what it is your asking.

Any chance of using a little punctuation.

Steve

 

[Firefox]

Either 6mm or 9mm ply probably for cupboards depending on spans/dimensions which you didn't mention.

For table tops probably something thicker like 12mm or 18mm ply, pine furniture board, or mdf. Again you don't mention spans, stiffening, support conditions or what finish you want so it is pretty hard to say what is best.

 

[oldish hippy]

ok could measure exizsting panels but it is cold and dark and didnt want to go out side and could look online at what they stock

 

[n brown]

that's all right,don't go out,just guesstimate it all and we'll make up the answers,but to give an idea i reckon somewhere between 3mm and 25mm should do it

 

[Tbear]

Hi Oldish Hippy

When it warms up a bit just pop down to your local friendly Caravan or Motorhome sales place and have a look in a few vans. Some even have a bit of a second hand junk area which you may get what you want for a couple of quid.

Richard