Thetford Toilets

David & Ann

Full Member
Posts
2,561
Likes
629
My Thetford toilet seems to leak very slighty. That is water keeps trickling into the bowl and I need to release the seal plate daily. It fills up to about a large mug full. Is there a rubber seal that is leaking, if so, where do I find it?? Is there a way I could get to it?? Any advice would be most appreciated.
 
What type is it?

If it's the C200 electric flush model the problem will most likely be that the electric flush valve is leaking. The solution is to replace the valve.

Repair instructions for their fixed toilets are here: www.thetford-europe.com/web/show/id=51449/langid=42

I replaced the flush valve in ours a few months ago, the old one was staying open too long and letting too much water through.

It's a bit of a fiddly job but not too difficult.

AndyC
 
Last edited:
Thanks Andy. Looked at Tethfords listing. No grafics regards the toilet. I myself felt it could be the plunger but unable to find pics of where it is and how to go about it. Doesn't matter, I am off to Germany, so will have it down under my gaurantee. Thanks once again
 

Users who viewed this discussion (Total:0)

Back
Top