Technical

transice

Full Member
Posts
3
Likes
0
Does anybody on here Know anything about this gas system. I would like to know what the hanging bit it’s for.
 

Attachments

  • 4622D814-A1AD-4163-A159-E6A5C8442EBF.jpeg
    4622D814-A1AD-4163-A159-E6A5C8442EBF.jpeg
    337.1 KB · Views: 155
Does anybody on here Know anything about this gas system. I would like to know what the hanging bit it’s for.
Any chance of posting the picture with an arrow or circle indicating which hanging bit.

Any identification markings?

A sketch showing the pipework would help .
 
Any chance of posting the picture with an arrow or circle indicating which hanging bit.

Any identification markings?

A sketch showing the pipework would help .
I suspect it is the metal cylindrical object with an ovoid fixing bracket attached. As to what it is I haven't a clue, although, if it is ticking I would run - very fast!
 
can’t see fully but looks as though it could be an automatic changeover valve
 

Looks like a small heater to prevent the regulator freezing in cold temps.

Accessory for TRUMA MONOCONTROL CS DUOCONTROL CS, SECUMOTION, DUOCONFORT AND DUOCONTROL
12V power supply
The heater prevents ice formation by heating the regulator; in this way the gas supply is continuous even at 0 ° C or at lower temperatures.
 

Looks like a small heater to prevent the regulator freezing in cold temps.

Accessory for TRUMA MONOCONTROL CS DUOCONTROL CS, SECUMOTION, DUOCONFORT AND DUOCONTROL
12V power supply
The heater prevents ice formation by heating the regulator; in this way the gas supply is continuous even at 0 ° C or at lower temperatures.
Thank you for all your replies I know what it’s for now.
 

Users who viewed this discussion (Total:0)

Back
Top