Renault Master CV joint or wheel bearing

[Squibby]

I was coming back from the shops yesterday and noticed a clunking noise on full lock comming out of the car park, also while driving I have a whining sound, starts at 40 gets louder till 55 and then tails off slightly at 60, it is a constant niose stearing straight or turning right until you turn left and then stops.

Sounds like it's exspensive, any mecanics got any info it would be greatly received.

Squibby.

 

[stonedaddy]

Looks like u got it in one

I was coming back from the shops yesterday and noticed a clunking noise on full lock comming out of the car park, also while driving I have a whining sound, starts at 40 gets louder till 55 and then tails off slightly at 60, it is a constant niose stearing straight or turning right until you turn left and then stops.

Sounds like it's exspensive, any mecanics got any info it would be greatly received.

Squibby.

I think your heading to the post just about sounds right. Bearing or UJ ....
.... Tom ....

 

[Bakedbeans]

knocking on full lock - cv joint
constant niose stearing straight or turning right until you turn left and then stops - wheel bearing

Wouldnt worry too much about the cv joint, they can knock for thousands of miles

 

[Squibby]

Many thanks for the info I thought it would be a bit of both the CV joint and wheel bearing I may as well get them both done at the same time, it will save the cost of having the van stripped down and put back together twice.

Squibby.

 

[Woodster]

Hello squibby, Ii looks like i have just bought your old renault master. I was browsing the net looking at renault master conversions and one of your posts came and i realised the van in your avatar is the one i just bought. lol.

I hope you see this post as i would love to find out as much as i can about the van. I won't say what i paid for it but lets just say i paid to much. The know van needs a lot of work to get through it's next mot. I just hope i can get it on the road and at least get a year out of it. Please get in touch with any info you have . P.S. I didn't buy the van from you but from the guy you must have sold it to, so don't worry about telling me any faults you know about.

 

[bru]

Many thanks for the info I thought it would be a bit of both the CV joint and wheel bearing I may as well get them both done at the same time, it will save the cost of having the van stripped down and put back together twice.

Squibby.

had same whining with mine , changed wheelbearing but ended up being drive shaft bearing , bearing wasn't dear so worth doing while driveshaft off ,
its on drivers side shaft but centre of van , there isn't one on passenger side ,