Refillable bottle problem

  • Thread starter Deleted member 44082
  • Start date

Deleted member 44082

Guest
Hi,I have a problem with my filling my Gaslow r67 refillable bottle the pipe from the external filling point has a 21.8lh male fitting and the fitting on gaslow bottle I think is 3/4” unf male what would I need to do to make it a permanent fixing, or will I have to renew the whole pipe from the skirt of the m/home to the bottle... or is there a better way of doing this,tia
 
Hi,I have a problem with my filling my Gaslow r67 refillable bottle the pipe from the external filling point has a 21.8lh male fitting and the fitting on gaslow bottle I think is 3/4” unf male what would I need to do to make it a permanent fixing, or will I have to renew the whole pipe from the skirt of the m/home to the bottle... or is there a better way of doing this,tia

I should send the same question to Gaslow as the hose you discribe 21.8lh sounds like the take off not the filling pipe
 
Re refillable gas bottle

I think it’s 21.8 male pigtail LH which fits into the calor gas bottles ...
 
Thanks for the link it looks like I might have to get a a new stainless pipe or a new external filling system,...
 
When I got my GASIT system I bought 2 fittings to fit the 2 bottles ordered. these fittings screw on to the GASIT bottle outlet and this allows a standard Propane regulator to fit the bottles , as one end has a FEMALE thread, I keep one bottle connected to my bulkhead regulator and the other can be used in situ with a Propane regulator to run a Barbi or whatever. So maybe you could look at these?

Gas Bottle Outlet Converter to UK POL ( propane)
Gas Bottle Outlet Converter to UK POL ( propane)
Converter for Propane POL regulator or pigtail to fit on a GAS IT bottle gas outlet tap. Also works with gaslow, a…
RRP - £6.20
1 accs-024.190.png THIS.
 
Last edited:
I used one for a while whilst i had 3 free full Calor Lite`s ( got them with the recall notice a few years back ) to use up as well as my refillables.

Had 1 refillable and 1 Calor Lite fitted at the same time :hammer:
 
Wooie 1958,thanks for the link if the other end is 3/4”unf that would do the job without having to buy another external filling kit,many thanks for all who tried to help...

It basically screws onto the refillable bottle and makes it so the propane regulators / pigtails will screw into it with the left hand thread

i.e. Propane-Regulator.jpg Propane-Pigtail.jpg
 
It basically screws onto the refillable bottle and makes it so the propane regulators / pigtails will screw into it with the left hand thread

i.e. View attachment 72433 View attachment 72434

There is two fittings one going to regulator and one for the external filling pipe which is a different size of fitting from the regulator one I think it is 3/4”unf thread male do you think that is proper fitting...
 
The UK POL adapter in the link screws onto the refillable bottle outlet where the on/off screw valve which goes to the regulator.

It is not fitted to the external fill pipe.
 
But I am wanting to connect my external filling pipe as a fixture ...to the bottle... if possible...
 
In that case it is not the correct fitting and you need a dedicated fill hose.

I don`t think Gaslow sell them separately but Gas It do GAS IT SAE Rubber Fill hoses. - GAS IT Leisure Gas Bottles, Gas Cylincers and Gas Tanks - Catering, Motorhome, Campervan, Caravan, Farrier and Road Repair Refillable Gas Solutions.

They fit from the back of the external fill point to the fill point on top of the bottle

Many thanks for your help will try Gasit when they open on19th...
 
Thanks for link will try them tomorrow would be nice if I were able to get fitting rather than spending £80 odd quid on new

Received fittings from lpggpl which enabled me to resolve my problem...thanks again for your help ....
 

Users who viewed this discussion (Total:0)

Back
Top