Heki roof light

[daemon]

Hi guys,
have searched the forum for advise ,have a problem with the fly screen on the roof light ,i need to tension it some how the problem occurred when i
let go and it whipped back doesnt look any easy way of fixing it only by taking the lower surround off,Is there any easy way

 

[rienza]

Have you looked on Heki's web site for any info daemon?

It can be done but not sure how. Ours was done when we had some warranty work done. I think they took the frame off then tightened the cords.

 

[n brown]

is this a heki with a spring loaded roller blind or just accordion slide?either need the outer frame pulling off.if its a roller you have to wind the spring up and put it back under tension.bit tricky

 

[daemon]

is this a heki with a spring loaded roller blind or just accordion slide?either need the outer frame pulling off.if its a roller you have to wind the spring up and put it back under tension.bit tricky

blind with accordion slide and fly screen which is spring loaded .

 

[David & Ann]

Mine is a Heki panoramic ceiling window with a fly net screen and accordian blind, which clip into each other. You can either slide it for the fly screen where you can have light stream through or you can slide the accordian blind for darkness at night. The fly screen is spring loaded. On my screen, I can remove the covers. Disconnect from the accordian blind. The fly screen will roll back. There is a slot at one end of the fly screen for a flat end screw driver. Place screw driver in the slot (plastic) and turn to adjust the tension. I wonder if your is the same as mine.