Eberspacher d2 deisel wiring

[reynolds29]

Merry christmas to everyone.

I have a eberspacher deisel D2 heater. it is now fitted, however, I'm not sure of what size wire to use from the heater to the battery. the route is about 3 meters long.
Any ideas would be really helpful.

thanks.

 

[terry1956]

Hi,

Hi, I have a wiring loon for the same, and the wiring i around 2mm flex cable. the heater only useds 9 amps to start and then cuts down to around 4amps running
so any 13amp wire will pass, but tray to go a bit larger if possable to cut down on power loss.
michael

 

[Paul-vw-california]

Flexable 2.5mm2 will do fine.

I wired my heater up with 2.5mm2 singles, and it worked fine.