Search results

Welcome

Welcome

welcome

Welcome

spray with leak tester or at a pinch soapy water. You may need to check pipework inside van too. But if you suspect a leak, it would be advisable to get it checked professionally. It may cost a few pounds, but how much is your life worth?

does light go out when cassette is removed. if yes, sounds like magnetic lost stuck in up position. tap around cassette sides, area where it meets reed switch, to try to dislodge float. If no, then suspect reed switch. Tap with plastic handle of screwdriver. If this works replace switch.

3116

Go by tyre size 20x*.**

And the 2.3JTD can be remapped for low end torque/economy. 110bhp to 124bhp a lot more fifth gear friendly.

Sikaflex ebt+

247

Welcome along

Best time to play with things, if it's broken , you can't break it anymore. Could be a blown internal fuse, popped cap or just a dry solder joint which finally gave up. Could be quick cheap fix or NFF and replacement needed.

think he means like this

ACEA number is important. My Berlingo requires C2 oil, anything less will kill the engine within a couple of hundred miles.

Isn't modern technology brilliant :goodluck:

I have a little round alarm control button on my Berlingo, like yours with little black button and LED. To disable the alarm I have to input the four digit code. input first number of presses, wait for confirmation flash, input second digit wait and so on for the four digits. If this sounds the...

The damp being trapped behind the under seal was the reason I started looking for a non setting moisture barrier. With an oil based non setting sealant, the thinking is, any corrosion will be visible, so treatable. Hidden under a solid barrier it can cause a lot more damage.

thin it with white spirit, when the spirit evaporates, it will leave the oil coating. Used a Kero and oil mix under land rovers

A friends farther worked for Ford and always painted the under side of his cars with the oil from an oil change. They received rust longer than most old fords