fifthwheel
Guest
This has been very helpful to me and I am sure will be to others building from sheet material. Tutorials available on youtube.
https://www.maxcutsoftware.com
https://www.maxcutsoftware.com
fifthwheel
Guest
Deleted member 4404
Guest
With the ridiculous cost of some sheet materials, tools like this can save a lot of money.
Not only a saving on waste, but also the need to buy that extra sheet 'just in case'.
Not only a saving on waste, but also the need to buy that extra sheet 'just in case'.
Misterg
Guest
Another vote for Maxcut. The cutting plans have been my bible for the last 9 months!
Deleted member 4404
Guest
The link is now in Resources, so it is easy to find.
wildebus
Full Member
- Posts
- 12,155
- Likes
- 17,689
To go along with this, a way to cut straight lines is handy.
Branded ready-made saw guides can be very expensive, but it is very easy to make you own (I made a few to use depending on if the cut is very long, 'typical'', or just short lengths) and are much quicker and more accurate then using a straight edge to push against. I use mine all the time
Check out the following video with a very good 'how-to' to make your own
Branded ready-made saw guides can be very expensive, but it is very easy to make you own (I made a few to use depending on if the cut is very long, 'typical'', or just short lengths) and are much quicker and more accurate then using a straight edge to push against. I use mine all the time
Check out the following video with a very good 'how-to' to make your own