Fiat Ducato 160 multi jet

No cracking visible on the original housing so when i've time i may do a pressure test after checking the torque on the housing top and carry as a spare.
 
I've had three let go on me.
Each time the seal has stretched and blown out from between the lid and bowl.
When you take the lock ring off, you'll see it poking out in one spot.
Just make sure you use tool and torque wrench to replace lock ring.
I also carry two spare. The original, one bought from eBay and the one on the van is from main dealers.
Takes about twenty minutes to swap out, if you have a spare.
 
You must log in or register to reply here.

Users who viewed this discussion (Total:0)

Back
Top